62
PC INTERFACE
PC INTERFACE
PC INTERFACE
PC INTERFACE
PC INTERFACE
Data transmission from the instrument to the PC can be done with the
HI 92000
Windows
®
compatible
software (optional).
HI 92000
also offers graphing and on-line help feature.
Data can be exported to the most popular spreadsheet programs for further analysis.
HI 4221
and
HI 4222
instruments have two available serial interfaces: RS232 and USB. The desired serial
interface can be selected from the settings window of the
HI 92000
software.
If choosing the
RS232
serial interface, use the optional Hanna
HI 920010
cable connector to connect your
instrument to a PC. Make sure that your instrument is switched off and then plug one connector to the
instrument RS232 socket and the other one to the serial port of your PC.
Note
: Other cables than
HI 920010
may use a different configuration. In this case, communication between
instrument and PC may not be possible.
If choosing the
USB
serial interface, use a standard USB cable to connect your instrument to the PC.
For both serial interfaces, make sure that the instrument and the
HI 92000
software have the same baud rate
and the appropriate communication port.
To delete lots
:
• Press
while in
Log Recall mode.
• Press
or
to access delete or delete all mode.
Otherwise, press
to return to
Log Recall view mode.
• After selecting one of the deleting modes, use
or
to select one lot and then press
or
to delete the selected lot or all lots. The “Please wait...”
message will be displayed on the LCD until the selected lot or
all lots are deleted.
• Press
and then press
to exit deleting mode
and return to
Log Recall view mode.
• Press
to exit
Log Recall mode and return to Measure
mode.
Note
: Logged lots should also be deleted whenever “Please Delete Old Log Files” or “Low Data Logging Space”
message appears on the LCD, in the Reminder messages area.
