Hanna Instruments HI 255 Instruction Manual Download Page 3

Page: 3 / 56

PRELIMINARY EXAMINATION

Remove the instrument from the packing material and examine it carefully to

make sure that no damage has occurred during shipping. If there is any

damage, notify your Dealer or the nearest Hanna Customer Service Center.

Each instrument is supplied with:

HI 1131B

Glass-body Combination pH Electrode with 1 m (3.3') Cable

HI 76310

Conductivity / TDS probe

HI 7662

Temperature Probe

HI 76404

Electrode Holder

pH 4.01 & 7.01

Buffer Solutions (20 mL each)

HI 7071S

Electrolyte Solution

12VDC Power Adapter

Instruction Manual

Note:

Save all packing material until you are sure that the instrument

functions correctly. All defective items must be returned in the original

packing with the supplied accessories.

The HANNA

HI 255

is a logging microprocessor-based pH, ORP, Conductivity

(EC), TDS, NaCl and Temperature bench meter. Relative mV feature is also

provided.

The pH measurements are compensated for temperature effect manually or

automatically with the

HI 7662

temperature probe.

pH Calibration is possible in up to three points, using five memorized buffers

(4.01, 6.86, 7.01, 9.18 and 10.01).

The autoranging feature of the EC and TDS ranges automatically sets the

instrument to the scale with the highest possible resolution.

The conductivity measurements are compensated for temperature effect manually

or automatically with the temperature sensor inside the conductivity probe. It is

also possible to disable the temperature compensation and measure the actual

conductivity.

The temperature coefficient is user selectable.

The

GLP

feature provides a guarantee of data consistency.

An alarm time-out is available to alert the user that too much time elapsed

since last pH calibration.

The instrument can store data in memory at the users request for later

retrieval.

GENERAL DESCRIPTION

Summary of Contents for HI 255

























































Search results

Summary of Contents for HI 255

Reviews:

Related manuals for HI 255

Brands by name

Popular brands

Hanna Instruments HI 255, Instruction Manual

Search results

Summary of Contents for HI 255

Reviews:

Related manuals for HI 255

Brands by name

Popular brands