Hanna Instruments HI 255 Instruction Manual Download

Page: 2 / 56

TABLE OF CONTENTS

WARRANTY ................................................................................................................... 2

PRELIMINARY EXAMINATION ........................................................................................... 3

GENERAL DESCRIPTION .................................................................................................... 3

FUNCTIONAL DESCRIPTION ............................................................................................. 4

HI 255 SPECIFICATIONS .................................................................................................. 5

OPERATIONAL GUIDE ....................................................................................................... 7

AUTORANGING ................................................................................................................ 11

pH CALIBRATION ................................................................................................................ 12

RELATIVE mV CALIBRATION .......................................................................................... 15

ECS/TDS CALIBRATION ................................................................................................... 16

NaCl CALIBRATION .......................................................................................................18

GOOD LABORATORY PRACTICE (GLP) .....................................................................................19

LOGGING FUNCTION .......................................................................................................25

SETUP .................................................................................................................................31

TEMPERATURE CALIBRATION (FOR TECHNICAL PERSONNEL ONLY) .................................36

mV CALIBRATION (FOR TECHNICAL PERSONNEL ONLY) .............................................. 38

PC INTERFACE ............................................................................................................... 39

pH VALUES AT DIFFERENT TEMPERATURES .................................................................... 41

CONDUCTIVITY VERSUS TEMPERATURE CHART ................................................................ 42

ELECTRODE CONDITIONING & MAINTENANCE ................................................................. 43

TROUBLESHOOTING GUIDE ........................................................................................... 46

TEMPERATURE CORRELATION FOR pH SENSITIVE GLASS .............................................47

ACCESSORIES .................................................................................................................... 48

WARRANTY

HI 255

is guaranteed for two years against defects in workmanship and

materials when used for its intended purpose and maintained according to

instructions. Electrodes and probes are guaranteed for six months.

This

warranty is limited to repair or replacement free of charge.

Damage due to accidents, misuse, tampering or lack of prescribed maintenance

is not covered.

If service is required, contact the dealer from whom you purchased the

instrument. If under warranty, report the model number, date of purchase,

serial number and the nature of the problem. If the repair is not covered by

the warranty, you will be notified of the charges incurred. If the instrument is

to be returned to Hanna Instruments, first obtain a Returned Goods Authori-

zation number from the Technical Service department and then send it with

shipping costs prepaid. When shipping any instrument, make sure it is

properly packed for complete protection.

Dear Customer,

Thank you for choosing a Hanna Instruments product.

Please read this instruction manual carefully before using the instrument.

This manual will provide you with the necessary information for correct use of

the instrument, as well as a precise idea of its versatility.

If you need additional technical information, do not hesitate to e-mail us at

[email protected] or turn to the back cover for our worldwide contact list.

Summary of Contents for HI 255

























































Search results

Summary of Contents for HI 255

Reviews:

Related manuals for HI 255

Brands by name

Popular brands

Hanna Instruments HI 255, Instruction Manual

Search results

Summary of Contents for HI 255

Reviews:

Related manuals for HI 255

Brands by name

Popular brands