7
HI 120
MAIN KEYBOARD ON THE RIGHT
1)
CAL
key, to enter and exit/escape calibration mode.
SET
key (second function), to enter/exit SETUP mode.
2)
CFM
key, to confirm different values.
GLP
key (second function), to display Good Laboratory Practice Information.
3)
CLR
key, to clear calibration or logged data.
4)
key, to manually increase temperature value or other parameters.
AutoHOLD
key (second function), to freeze the first stable reading on
the LCD.
5)
key, to manually decrease temperature value or other parameters.
AutoLOG
key (second function), to start/stop AutoLOG mode.
6)
MODE
key, to select the measurement unit or to switch focused data.
7)
2nd
key, to select second key function.
8)
LOG
key, to store measured data.
9)
RCL
key, to enter/exit view logged data mode.
Note:
To select second key function, press
2nd
and then the desired key.
The “2nd” tag will appear on the LCD until the desired key is
pressed. To leave second key function selection, press
2nd
again.
1
9
8
7
6
5
4
3
2
Calibration Check
RCL
LOG
MODE
CLR
CFM
CAL
pH / mV Meter
HI 120
