Hanna Instruments Foodcare HI 93501, Instruction Manual

Page: 7 / 16

7
Each meter is supplied with batteries. Remove the battery cap,
unwrap the supplied batteries and install them while paying attention
to their polarity (see also the "Battery replacement" section for more
details).
TAKING MEASUREMENTS
Connect a suitable temperature probe to the meter (see pages 12 for a
complete list of Hanna probes).
Note : HI935007 and HI935008 has a fixed probe.
To switch the meter ON, press the ON/
OFF button on the front of the meter. If
it does not turn on, make sure that the
batteries are properly installed in their
place.
At start-up the thermometer displays all LCD segments for a few
seconds, followed by the percentage indication of the remaining
battery life; then it enters Cal Check mode and then enters measure-
ment mode.
OPERATIONAL GUIDE
HI93501
HI935001 and HI935007
HI935004 and HI935008