HANMEY IGN Series, Operator'S Manual

Page: 20 / 33

20
Chapter
Ⅵ
Notes for safety
1. The operators must understand the operating characteristics and notes for safety.
2. Check the rotary tiller overall, it cannot be used until the technical condition is normal.
3. The angle of universal coupling is not more than ±10°when it is operating, and is not more than 30° when the tractor turns a corner in the field. You must
dismantle the universal coupling when long-distance transporting.
4. Do not engage the clutch behind the blades entering into the soil or fall down the rotary tiller sharply to prevent the transmission parts of the tractor and
rotary tiller form injured.
5. Do not plough when the tractor turns a corner in the field.
6. Do not plough when the tractor reverse.
7. Do not ride in tractor expect the driver when the rotary tiller is operating to prevent some one from dropping in rotary tiller.
8. Do not close the rotating parts when the machine is operating.
9. The machine must be stop and checked when hearing the abnormal noise in operating, and fix a breakdown.
10. The power from the PTO shaft must be cut off when checking the transmission parts, blades and gears etc. of rotary tiller. If the parts must be replaced, it
is necessary to stop the engine. Do not replace the parts when the engine is operating.
11. It is required that the driver should enhance his vigilance to cut off power to prevent from breakdown because the rotary tiller is a type of farm machine
driven by tractor.