23
REMOVAL FROM TRACTOR
DANGER
READ CAREFULLY BEFORE COMMENCING TO
REMOVE THE MACHINE FROM THE TRACTOR.
THE ORDER OF THE FOLLOWING STEPS
MUST
BE FOLLOWED
EXACTLY
DISCONNECTING THE TOP LINK
MUST
BE THE
LAST
OPERATION PRIOR TO
DRIVING THE TRACTOR AWAY FROM THE MACHINE.
WARNING
Do
not operate quadrant lever or machine controls through the rear cab window whilst
standing on or amongst linkage components.
Always seek assistance.
Select a firm level site for parking the machine.
Replace parking legs in their sockets and secure in their lowest position.
Raise the machine on the tractor linkage until the weight is taken off the stabiliser.
Remove the lower stabiliser pins.
Unscrew the lift ram tap.
Lower the machine to be ground.
Extend the arms and place the flail head on the ground at half reach.
Disengage tractor P.T.O. and remove.
Disconnect stabiliser bars or loosen check chains as applicable.
Unbolt the control unit from the mounting pillar, remove from tractor cab and stow the
levers or switchbox clear of the ground.
Disconnect the stabiliser from the tractors top hitch position. Allow the stabiliser to slide
along the rail until it contacts the eccentric stops.
Remove draft link pins and drive tractor away from machine.
