2
GENERAL SAFETY INFORMATION
1.
PRESSURIZED DEVICES:
This equipment is a pressure
containing device.
•
Do not exceed maximum operating pressure as
shown on equipment serial number tag.
•
Make sure equipment is depressurized before
working on or disassembling it for service.
2.
ELECTRICAL:
This equipment requires
electricity to operate.
•
Install equipment in compliance
with all applicable electrical codes.
•
Standard equipment is supplied with electrical
enclosures not intended for installation in
hazardous environments.
•
Disconnect power supply to equipment when
performing any electrical service work.
3.
BREATHING AIR:
•
Air treated by this equipment
may not be suitable for
breathing without further
purification.Refer to applicable standards and
specifications for the requirements for breathing
quality air.
RECEIVING, MOVING, AND UNPACKING
A.
RECEIVING
This shipment has been thoroughly checked, packed
and inspected before leaving our plant. It was
received in good condition by the carrier and was so
acknowledged.
Check for visible loss or damage. If this shipment
shows evidence of loss or damage at time of delivery
to you, insist that a notation of this loss or damage
be made on the delivery receipt by the carrier’s
agent.
B.
UNPACKING
Check for concealed loss or damage. When a
shipment has been delivered to you in apparent
good order, but concealed damage is found upon
unpacking, notify the carrier immediately and insist
on his agent inspecting the shipment. Concealed
damage claims are not our responsibility as our
terms are F.O.B. point of shipment.
C.
MOVING
In moving or transporting dryer, do not tip dryer
onto its side.
D. STORAGE
IMPORTANT: Do not store dryer in temperatures
above 130°F.
E
N
G
L
I
S
H