4. Operation
4.2 Opening and closing the lid
•The lid can only be opened if the centrifuge is switched on.
•Do not reach with your fingers between the housing and lid.
•Close the lid completely before operation.
•
Opening the lid
Press the ( ) door key
•
Closing the lid
Put the lid on and press the edge of the lid.
4.3 Loading and removal of the rotor
•Only use rotors, parts, and accessories provided by Hanil Scientific Inc.
•Do not use scatched or cracked rotor in use.
Loading
①
Clean the motor shaft and the chamber.
- When loading the rotor, the temperature should be 10 to 30 degrees.
②
Load the rotor vertically onto the motor shaft.
③
Insert the wrench into the center hole of the rotor lid and turn it clockwise.
④
Check the rotor to make sure it loaded firmly.
Unloading
①
Insert the wrench into the center hole of the rotor lid and turn it counterclockwise.
sales
@ihanil.com / [email protected] l 10
