USER MANUAL
│
J1250
1.2 Precautions for use
Since this equipment is used in combination with a high-speed rotating continuous
centrifuge and a control box, it is necessary to familiarize yourself with the precautions for
use of each component.
Please check once more before use.
·
Check if any of the necessary parts and devices are missing. (Refer to p12~13, p15~17)
·
Check the power supply status and connection wiring conditions between the main body
and the Control Box.
(see p23)
·
Since it rotates at high speed, the rotating parts must be well balanced.
·
Check if the Serial No. of the body, cap, and triangular rotor blades composing the bowl
match before use. (see p8)
.
For the best operation, use the bowl set that matches the serial number of the bowl attached
to the
front of the body. (see p8)
·
The product installation site must be leveled and firmly fixed on a flat place.
·
Check that there is no problem with the wiring connected to the device, and connect the
power cord to the device that requires power.
·
Do not place any obstructive objects within 60cm of the device.
·
Do not touch or impact the main body while it is operating.
·
As this is a device that uses electricity, be careful not to get an electric shock when handling it.
·
Do not use flammable, hazardous, or radioactive substances that can generate volatile or
explosive vapors.
·
In case of an emergency, operate the emergency switch and open the door after confirming
that the product is stopped.
(see p35)
·
When not operating the device, turn off the power.
HANIL Scientific Inc.
│
ihanil.com
│
Service: +82-2-3452-8966 / [email protected]
7