Technical Support : +82-2-3452-8966 / [email protected] 11/26
3. Installation
3.3 HyperCOOL Connection
[Preparation of Chamber]
1. Ensure all the vacuum valves are firmly closed.
2. Ensure all the connections and attachment from the chamber are tightly sealed.
3. Ensure the drain valve does not contain any water.
4. Ensure both the drain valve and the vacuum release valve are fully closed.
5. Check the status of all the rubber valve handles are closed.
[HyperCOOL as a 'Freezer Dryer']
[Preparation of Vacuum Pump]
1. Connect vacuum hose to the vacuum pump inlet and firmly clamp it not to
release vacuum.
2. Connect vacuum hose to the HyperVAC vacuum nozzle and firmly clamp it.
[Preparation of Accessories]
1. Chamber or manifold should be mounted on top of HyperCOOL for freeze-drying
samples.
2. Ensure all the connections are tightly sealed.
Close
Opened
Vacuum Release
Summary of Contents for HyperCOOL HC3055
Page 1: ...Operation Manual HyperCOOL HC3055 HC3110 Product Model Name Date of Purchase...
Page 27: ...MEMO...
Page 28: ...RECYCLABLE...
