OPERATION
Press the „MODE“ button to switch between
Alarm Mode, Clock Mode and Timer Mode. The
selected mode is displayed.
TIME SETTING
When you are in Clock Mode, press the
„SEC“, „MIN“ and „HOUR“ buttons to set the
desired time. After 15 seconds in Clock Mode,
the „HOUR“, „MIN“ and „SEC“ buttons are
automatically locked to prevent accidental time
adjustment. If you want to change the time,
press the „MODE“ button again until Clock
appears in the display again. The „HOUR“,
„MIN“ and „SEC“ buttons are now enabled again
for 15 seconds from the last time the button was
pressed.
COUNT-UP
Press the „MODE“ button to enter the timer
mode and press the „START/STOP“ button to
start timing. Press the „START/STOP“ button
again to stop the timer and then press the
„Clear“ button to reset the time to zero.
COUNT-DOWN
Press the „CLEAR“ button to reset the previously
set value. Then press the „SEC“, „MIN“ and
„HOUR“ button to set the desired time.
Note: When setting the countdown, the seconds
or minutes must be set first, as the „HOUR“
key is used to switch between the two parallel
possible time measurements.
Then press the „START/STOP“ button to start
the countdown. After interrupting the countdown
timer, press the „CLEAR“ button to return to the
previously set time. Press the „CLEAR“ button
again to reset the time.
After you have started the first timing, press
the „HOUR“ key to set a second timing. The
operation is the same as before. The time
measurement you are currently in is displayed at
the top with the respective numbered bell.
ALARM MODE
Press the „MODE“ button to enter the alarm
mode. Press „SEC“ button to set the alarm
seconds and press the „MIN“ button to set the
minutes.
Press „START/STOP“ to turn the alarm clock on/
off. When the alarm function is activated, a small
alarm clock appears as an icon. If no alarm
