Hanger ACP OmniSWD User Manual Download Page 31 | Manualshive

Page: 31 / 31

Hanger ACP OmniSWD User Manual Download Page 31

OMNISWD

®

USER MANUAL

29

COPYRIGHT © 2017, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED

Manufactured for ACP by:

EMS Physio Ltd

Grove Technology Park
A1 Downsview Road
Wantage, Oxfordshire,
OX12 9FE, UK
Tel +44.0.1235.772272
Fax +44.0.1235.763518

Return of Defective Equipment

Any  Equipment  returned  to  the  ACP  Service  Center  under  warranty  coverage  must  have  the  Warranty  coverage
validated and must receive authorization from ACP Customer Support prior to being received at the Service Center.

Shipping  charges,  insurance,  and  any  other  costs  incurred  in  sending  product  to  ACP  Service  Center  is  the
responsibility of the customer and will not be refunded.  ACP shall cover the shipping charges and related costs to
return the unit to the customer, provided repair is deemed to be under warranty.

ACP  is  not  responsible  for  any  loss  or  damage  to  the  Equipment  prior  to  receipt  at  the  ACP  Service  Center.
Equipment returned for warranty service must be shipped complete with all accessories (except for manuals), in its
original packing or equivalent so as not to be damaged while in transit.

Note:

Any Equipment sent to the ACP Service Center that is not covered by the ACP Limited Product Warranty is

subject to a minimum service and handling fee.

IMPORTANT:

DO NOT SHIP THE EQUIPMENT TO ACP SERVICE CENTER WITHOUT FIRST SECURING

AUTHORIZATION TO DO SO. EQUIPMENT SENT IN WITHOUT AUTHORIZATION FROM

ACP CUSTOMER SUPPORT WILL NOT BE ACCEPTED.

Returned Materials Shipping Address:

Accelerated Care Plus
Attn: ACP Service Center
4999 Aircenter Circle, Suite 103
Reno, NV 89502

0120

«
...
29
30
31

Summary of Contents for ACP OmniSWD
































Reviews:

No comments