89
Procedure of replacing LPG cylinder
（
1
）
Take canvas glove to avoid the leaking gas to frostbite finger when gas
changing.
（
2
）
Make sure the place is clear and the air is ventilating when charging LPG,
it is forbidden to smoke ,keep away from other naked flame
（
3
）
Fill LPG as following: Lay the LPG cylinder flat, and set the charging limit
valve upward, then screw off the dust cap on the charging valve, plug the filling
connector, open the inlet shutoff valve to charge LPG till 80% rated volume of the
container is full (the charging device is automatically closed when 80% rated volume
of the container is full), take out the filling connector, screw down the dust cap and
the charging limit valve.
Check all parts and make sure they are all at intact condition.
（
4
）
Lift the cylinder up to truck, and fix it, let the arrow
（
○
1 ）
be upward, then
insert the fixed pin to cylinder.
Cylinder fixed way:
Metal belt bracket
The fixed way is opposite to disassemble way.
