32
–
Drop the fork to the lowest position.
–
Turn off the switch to “OFF” position, press down the emergency disconnect switch, pull out
the battery plug, and take off the key.
–
Fold up
7.7 Loading
Procedure:
–
Drive the truck carefully up to the loads.
–
Adjust fork height to make the forks are in the tray.
–
Raise the loads several centimeters to make sure if the loads are firm.
–
Travel the truck off the area.
–
Drop the load to lower position.
7.8 Unloading
Procedure:
–
Approach the deposit area.
–
Raise the loads to correct height.
–
Travel forward, put the load on the unloading position and then stop.
–
Make sure the loads are right above, drop the forks slowly until the forks are out of the load.
Summary of Contents for CBD20-AMC1
