22
5 Battery
The truck equips with two 12V/70Ah maintenance-free colloidal batteries. When the battery
temperature reaches 25
℃
~
30
℃
, its service life is the longest. Lower temperature reduces
battery available capacity and higher temperature shortens battery service life.
Per battery weighs about 25kg.
5.1 Safe operation rules for battery use
–
Before charging, check if there is damage on cable connection and plug connection pieces.
–
Charge in the well-ventilated place.
–
No smoking or open fire around when charging.
–
No inflammable substances or spark-generating materials being present or stored within a
distance of 2 metres of the truck parked for battery charging.
–
Fire-fighting equipment must be kept in the charging place.
–
No mental objects placed on the battery.
–
If the battery is used over 4 years, please replace it. Do not mix the old and new batteries.
–
Do not use when under overload, high humidity, or heavy grade.
–
When charging, do not wrongly connect the battery polarity, otherwise it may damage the
battery.
–
After battery scrap, please return to the recycle bin unified handling, may not arbitrarily
discarded.
5.2 Maintenance of the Battery
–
Do not fill water for battery maintenance when it is in service.
–
Inspect the battery leakage, damage and clean the surface periodically.
–
Inspect every joint of the battery for solidness to avoid sparks or short circuit between
the positive and negative poles.
–
Keep the battery upright and no headstand. Make sure it is against vibration, pressing and
well fixed. Keep the batter away from violent vibration, collision and friction.
–
The maximum starting current of the truck should not exceed 1.25 times of its rated capacity.
For instance, the maximum starting current should not exceed 87.5Ah for a battery with 70Ah
rated capacity. Do not operate a truck when the working current is far higher than its rated
Summary of Contents for CBD15-A2MC1
