15
3 Safety Instructions
1)
Only trained and authorized operator
shall be permitted to operate the truck.
2)
Operator must wear helmet, working
shoes and uniform
3)
Never carry people.
4)
It is not allowed to reconfigure the truck
without manufacturer’s permission.
5)
Do
not
work
in
flammable
and
combustible environment.
6)
Check the oil, fluid leakage, deformation,
flexibility in certain time. If neglected,
service life of forklift will be shorted and
in serious condition there will be
accident.
–
Make sure change the “safety parts”
during the schedule maintenance.
–
Wipe off the oil, grease or water on the
soleplate, foot pedal and control lever.
–
No smoking or any spark, smoke near
the battery when checking.
–
Be careful of scald when checking motor
and controller.
7)
The controller equips with energy
accumulator, do not touch between B+
and B- to avoid electric injury. If you
need check or clean the controller,
connect load(like contactor coil or horn
or bulb or resistance) between
controller B+ and B- to discharge the
controller capacity.
8)
Whenever you find the forklift abnormal,
stop the truck, put on the DANGEROUS
or FAULT sign to the truck, remove the
key, and report to the managing person.
Only after eliminating the fault can you
use the truck.
Summary of Contents for CBD15-A2MC1
