19
Required Parts
• Fuselage
• Engine mount (2)
• #8 washer (8)
• 8-32 locknut (4)
• 12-inch (305mm) pushrod • 8-32 blind nut (4)
• #4 x 3/8-inch sheet metal screw (5)
• 17
3
/
4
-inch (450mm) pushrod tube
• #8 x 1-inch machine screw (8)
Required Tools and Adhesives
• Drill
• Felt-tipped pen
• C-clamp
• Fuel filler dot
• Drill bit: 11/64-inch (4.5mm)
Step 1
Attach the engine mounts to the fuselage using four
8-32 x 1-inch machine screws, four 8-32 blind nuts
and four #8 washers.
Step 2
Position the engine on the mount so the drive washer is
5-inches (127mm) forward of the firewall. Use a clamp to
hold the engine in position.
Step 3
Use a felt-tipped pen to mark the location of the mounting
holes onto the engine mount rails.
Glow Engine Installation
