Hangar 9 Beast 100, Assembly Manual

Page: 7 / 70

7
A Word From The Creator Of The Beast
Most designers of cool machines like race cars, boats, motorcycles or airplanes constantly look
for ways to increase performance out of their designs. In many cases, this results in improved
designs as experience is gained. Evolution of design. The Beast is exactly this....the latest
evolution of the Model 12. While most Model 12 aircraft are 2-place aircraft, the Beast has
been modified to be a single seat aircraft. This reduced the weight of the basic aircraft and
eliminated some of the drag associated with the 2-place canopy.
There were three main design improvement goals in creating the Beast. Lighter weight,
increased power, and increased maneuverability. Several design changes to the Beast
were developed based on changes Quique Somenzini had developed for giant-scale RC
models. Weight was reduced 150 pounds (10%) through the use of titanium, carbon fiber,
and some lightweight components. Power of the 10,000 cc, 9-cylinder engine was increased
to 410 hp with modifications including high-compression pistons, fuel injection and advanced
micro-polishing of internal parts. Increased maneuverability was found by wingspan and tip
modifications, aileron design changes, improvements to the tail and CG. The Beast weighs
1420 pounds with 1850 pounds of thrust. This isn’t as good as most 3D RC models but is
far better than most full scale aerobatic airplanes. The Beast has a 2-second takeoff roll and
climbs at over 4000 feet per minute. A top speed of 250 mph and a roll rate of 365 deg/sec.
The Beast, in both full size and RC versions, is the product of shared information between RC
and Full Scale designers. The Hangar 9 Beast is a fantastic model airplane with outstanding
performance, great looks, and solid construction. Enjoy your Beast and let it “Roar to Life” at a
field near you!
Kevin Kimball
For more information on the full scale BEAST visit:
www.jimkimballenterprises.com
www.pittsmodel12.com
www.beastairshows.com