background image

MOD. FT04 rev.01                                  

HELP V (use and maintenance) Ed. 3 - updated: 12/2018 

 

– 

 

1.  General information  

 

HELP V is a light and compact lifter which, installed near 
the  sliding  door,  allows  to  lift  a  person  with  his 
wheelchair,  with  a  maximum  load  of  200kg  (250  kg 
optional). 
All the operations are carried out by a remote control. 
The  lifter  platform  allows  to  lift  the  person  on  the 
wheelchair  from  the  ground  to  the  floor  of  the  vehicle, 
facing  a  drop  of  maximum  700mm.  Then,  thanks  to  the 
rotation of the platform, it allows the entrance into the vehicle. Its particular structure allows to load the 
person on the wheelchair with a lateral space of 1000mm. 
With  one  easy  operation  it  is  possible  to  close  the  platform  of  the  lifter  and  then  to  leave  free  the 
space near the door . 
Moreover, HELP V is provided with a manual emergency system. 

 

2.  Safety 

 

The system must only be used for the purposes it was created for; any other use is considered as 
improper. 
CARROZZERIA 71 s.r.l. is not liable for any damage caused by incorrect system use. 
 
Explain  how  HELP  V  works  to  anyone  who  has  to  work  on  your  vehicle  (car  dealer,  repair  centre, 
mechanic, etc.), and also to all those who use it. 
In these cases disconnect the whole system. 

 
If it is necessary to effectuate maintenance operations and repairs to the vehicle, we advise 
You to give to the operator the telephone number of the installer of the system for further 
indications. 

 

It  is  advisable,  after  2  years,  in  collaboration  with  Your  local  Handytech  Centre,  to  check 
the status of the whole system and maybe to replace some parts. 

Moreover, we remember to you, that out of the warranty period, the maintenance program is at Your 
discretion  and  risk,  but  the  advice  is  to  follow  it  carefully,  because  the  negligence  could  cause 
malfunctions of the system and could create dangers during the utilization of the device. 
Maintenance operations of the device during the warranty period and out the warranty period are to 
be borne by the customer. 

 
The manufacturer guarantees the product for 24 months, only if the maintenance operations 
have been implemented by an authorized Handytech Centre. 
 
 
It is advisable to use the lifter HELP V on a flattest terrain possible and to avoid muddy and 
gravel grounds 
During  the  use  it  is  necessary  to  check  that  near  the  lifter  there  are  not  people,  animals  or 
objects that could interfere with the movement of the lifter. 

 
 
 
 
 
 
 
 

Summary of Contents for FT04















Reviews: