35
3" (7,6 cm)
Screw
6"
(15,2 cm)
3
FINISH
2" (5 cm)
Nail
Fig. A
Trim
6" (15,2 cm)
Panel
Same
Measurement
Fig. B
Trim
2" (5 cm)
Nail
Fig. C
Fig. D
Fig. E
3" (7,6 cm)
Screw
2x3"
3" (7,6 cm)
Nail
DOOR
Secure the wall frames bottom plate onto oor
using two 3" nails between studs.
Screw through the back wall trim into the top plate
and at an angle into the
Á oor
using 3" screws
(Fig. D, E)
.
Remove temporary brace.
Repeat process to secure the left side wall.
DOOR
Center side wall on oor front to back.
Nail the lower side wall corner to the
back wall trim with one 2" nail
(Fig. A)
.
1
CENTER
DOOR
x12
x4
x70
DOOR
2
BEGIN
2" (5 cm)
3" (7,6 cm)
3" (7,6 cm)
SIDE WALLS INSTALLATION
Be sure the measurement between the
panel edge and the trim is the same
along the entire length. Then secure
with one 2" nail in the upper corner
(Fig. B)
.
Nail along the panel edge into the trim
using 2" nails spaced 6" apart.
Nail along bottom of panel using 2"
nails 6" apart. Angle nail to hit oor
frame
(Fig. C)
.
Stand right side wall on oor.
It is important to secure the side wall in the following order.
DOOR
3" (7,6 cm)
Screw
