12
DOOR
Flush
(2) Nails
Fig. A
Attach the 48 x 96" panel with the rough side up (painted-grid lines side)
with the 48" edge and corner ush to the oor frame
(Fig A)
. Secure panel
with two 2" nails in the corners.
Move to the opposite end. Using the long edge of the panel as a lever move the
panel side-to-side until the top corner is ush to the oor frame
(Fig. B)
.
Secure panel with two 2" nails in the corners.
2
BEGIN
1
3
4
Continue attaching the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists under panel.
5/8 x 48 x 96"
(1,6 x 122 x 244 cm)
PARTS REQUIRED:
Ensure your Á oor frame is square by installing one panel and squaring frame.
96"
(244 cm)
12" (30,5 cm)
inside panel.
6" (15,2 cm)
edges of panel
48"
(122 cm)
x1
x55
Flush
Flush
Grid lines
UP
2" (5 cm)
Fig. C
Flush at
opposite
corner edge
Fig. B
(2) Nails
Check the oor frame is square by measuring diagonally across the frame corners.
If the measurements are the same your oor frame is square. The measurement
will be approximately 151" (383,5 cm)
(Fig. C)
.
151"
(383,5 cm)
151"
(383,5 cm)
DOOR
FLOOR PANELS
20-5/8"
(52,4 cm)
Seam
DOOR
DOOR
