Handspring VisorPhone, User Manual, Page: 14 / 126

8 Getting Started
Step 6: Charge the battery
1. Plug the travel charger into a wall outlet.
2. Insert the travel charger cable into the connector on your handheld.
Tip: When your phone is on, the charge icon appears in the Phone
application while your VisorPhone charges. Note that your
VisorPhone must be in your handheld while charging, and that it
takes about 1.5 hours to fully charge the battery. It’s time to recharge
the battery when you observe one of the following:
■
the LED turns red and blinks quickly
■
the LED does not turn on when you turn on your phone
■
the battery gauge in the top-right corner of the Phone
application appears empty when your VisorPhone is on and the
Phone application is on the screen
LED turns solid red
when charging
and solid green
when charged