manualshive.com logo in svg

Handspring Visor, User Manual

The Handspring Visor User Manual is an essential resource for maximizing the potential of your device. This comprehensive manual is available for free download at manualshive.com, providing step-by-step instructions, troubleshooting tips, and in-depth features. Unlock the full potential of your Visor with our detailed and expertly crafted user manual.

Share
Download
background image

Page 138 

Application Specific Tasks

Calculator

Calculator includes two operating modes: Basic and Advanced. In 
Basic mode you can perform simple mathematical calculations. In 
Advanced mode you can access scientific functions and perform 
sophisticated math calculations. This section explains how to select 
the operating mode and use the buttons and menu options available 
in each mode.

Selecting the Calculator mode

The Change Mode dialog enables you to choose whether you want to 
work in Basic Calculator mode or Advanced Calculator mode. You 
can change modes at any time.

To select the Calculator mode:

1. Tap the Calculator icon 

 next to the Graffiti

®

 writing area.

2. Tap the Menu icon 

.

3. Tap Options, and then tap Change Mode.

4. Tap Basic or Advanced as the mode.

5. Tap OK.

Using the Basic Calculator buttons

The Basic Calculator includes the following buttons.

Clears the last number you entered. Use this button if 
you make a mistake while entering a number in the 
middle of a calculation. This button enables you to re-
enter the number without starting the calculation over.

Clears the entire calculation and enables you to begin a 
fresh calculation.

Toggles the current number between a negative and 
positive value. If you want to enter a negative number, 
enter the number first 

and then press

 the +/- button.

Places the current number in memory. Each new 
number you enter with the M+ button is 

added to the total

 

already stored in memory. You can add either a 
calculated value or a number you enter by pressing the 
number buttons. Pressing this button has no effect on 
the current calculation (or series of calculations); it 
merely places the value into memory until it is recalled.

Summary of Contents for Visor
































































































































































































































































































Reviews:

No comments

Related manuals for Visor

Sony PEG-NX80V - Clie Handheld Brochure preview
PEG-NX80V - Clie Handheld
Brand: Sony Pages: 1
Sony PEG-N760C Audio Player v2.1 Brochure preview
PEG-N760C Audio Player v2.1
Brand: Sony Pages: 1
Sony CLIE PEGA-BC10 Charging Note preview
CLIE PEGA-BC10
Brand: Sony Pages: 1
Sony CLIE PEG-UX40 Specification Sheet preview
CLIE PEG-UX40
Brand: Sony Pages: 1
Sony PEG-NR70 - Personal Entertainment Organizer Limited Warranty preview
PEG-NR70 - Personal Entertainment Organizer
Brand: Sony Pages: 4
Sony PEG-NZ90 - Personal Entertainment Organizer Manual preview
PEG-NZ90 - Personal Entertainment Organizer
Brand: Sony Pages: 10
Sony CLIE PEG-T415 Specifications preview
CLIE PEG-T415
Brand: Sony Pages: 1
Sony CLIE PEG-SJ22 Specifications preview
CLIE PEG-SJ22
Brand: Sony Pages: 1
Sony CLIE PEG-T615C Operating Instructions Manual preview
CLIE PEG-T615C
Brand: Sony Pages: 24
Sony CLIE PEG-UX40 Service Manual preview
CLIE PEG-UX40
Brand: Sony Pages: 33
Sony PEG-NX60 - Personal Entertainment Organizer Operating Instructions Manual preview
PEG-NX60 - Personal Entertainment Organizer
Brand: Sony Pages: 40
Sony CLIE PEG-TG50 Troubleshooting Manual preview
CLIE PEG-TG50
Brand: Sony Pages: 56
Sony CLIE PEG-T665C Operating Instructions Manual preview
CLIE PEG-T665C
Brand: Sony Pages: 218
Sony PEG-N760C Audio Player v2.1 Operating Instructions Manual preview
PEG-N760C Audio Player v2.1
Brand: Sony Pages: 232
Sony CLIE PEG-TH55 Handbook preview
CLIE PEG-TH55
Brand: Sony Pages: 231
Sony CLIE PEG-UX40 Handbook preview
CLIE PEG-UX40
Brand: Sony Pages: 197
Sony CLIE PEG-TJ27 Handbook preview
CLIE PEG-TJ27
Brand: Sony Pages: 195
Sony CLIE PEG-T415 Operating Instructions Manual preview
CLIE PEG-T415
Brand: Sony Pages: 223

Brands by name

Popular brands

Load more brands