H&S M6, Parts List And Operator'S Instructions

Page: 9 / 34

OPERATION
1. Check entire unit carefully before first operation. Tighten bolts and set screws that might have
come loose in handling. Lubricate as explained in the lubrication guide.
2. Adjust tractor drawbar to allow for maximum clearance between drawbar and ground. Attach merger
to tractor with a hitch pin that has a safety locking device.
3. Remove weight from lift jack and move jack to storage position.
4. Connect hydraulic hoses. (See Page 13)
5. Check tires and inflate to recommended pressure.
6. Run pickup and conveyor for several minutes to ensure proper assembly and lubrication. Successful
operation will be achieved by periodic adjustments and experience of the operator. Make sure to read
and understand all adjustments.
-9-
DO NOT GO NEAR LEAKS
• High pressure oil easily punctures skin causing
serious injury, gangrene or death.
• If injured, seek emergency medical help.
Immediate surgery is required to remove oil.
• Do not use finger or skin to check for leaks.
• Lower load or relieve hydraulic pressure
before loosening fittings.
11599
Jack Storage
Operator Manual
Storage