H&S H D 7+4 FEEDER BOX, Operator'S Manual And Parts List

Page: 13 / 46

CROSS CONVEYOR
ADJUSTMENT
Proper tension should be maintained on
cross conveyor chain when operating
box. To adjust cross conveyor, loosen the
jam nuts (A) on tightener bolts (B)). Move
adjusting nuts (C) on tightener bolts until
proper tension on chain is reached. The
chain is properly adjusted when the cen-
ter slats clear the bottom return pan by
about 1/16 of an inch. Adjust both sides
equally. Lock in place with jam nuts.
B A C
-13-
Shown here is the spring loaded plastic
guard (A) which protects the operator
from accidentally being exposed to the
bottom beater at the discharge opening
during operation of forage box. Keep
this guard in proper position at all times
when operating forage box.
A