H&S 9117, Operator'S Manual

Page: 33 / 56

NEEDLE VALVES
An adjustable needle valve is provided on each hose of the discharge
auger rotation to control the speed of auger swing to provide smooth
rotation. Needle valves are located at the rear of the machine by
the hydraulic rotation motor. Unlock the set screw on the valve.
Adjust each valve by dialing it left or right to decrease or increase
auger rotation speed. After the speed has been set, lock the set
screw down.
ADJUSTMENTS
-31-
12’ DISCHARGE AUGER
Transport Cradle
The unloading auger must always be moved to and set into the
transport cradle before the mixer is transported. If the auger does
not set in the cradle, adjust the stop bolt on the vertical rotating
auger at the rear of the machine.
3’ & 6’ Discharge Auger Extensions
The 3’ and 6’ discharge auger extensions fold back and lock into position with a safety lock pin. If the main
pin does not line up with the hole on the bracket of the standard 12’ auger, loosen the bolts and adjust
the bracket.