H&S 5134, Operator'S Manual And Parts List

Page: 35 / 72

DECAL PLACEMENT
-33-
Your H&S Top Shot was manufactured with operator safety in mind. Located on the Top Shot are various
decals to aid in operation, and to warn of danger or caution areas. Pay close attention to all the decals on
your
Top Shot .
DO NOT REMOVE ANY OF THESE DECALS. IF DECALS ARE LOST, DAMAGED, OR
IF YOUR
Top Shot IS REPAINTED, REPLACE DECALS.
REMEMBER: DECALS ARE FOR YOUR PROTECTION AND SAFETY.
Listed below are the decals on your Top Sho t. These decals may be ordered individually by part number,
or by ordering as a complete set.
Part # Quantity Description
1494A 3 Do not operate this machine if this decal is exposed. Replace safety shields
1494B 2 Do not remove shields - moving parts inside
1494J 1 Do not clean or work on the machine without first disengaging power
1494K 1 Do not remove shields - moving parts inside
1494L 2 Rotating driveline
3494A 1 Remote Grease Decal
5896B 2 Rotating driveline
9194A 4 No step - stay clear
11210B 1 Do not remove shields
11599 4 Do not go near leaks
51010 4 Pinch Point
72203A 1 Help avoid injury - Read and understand the operators manual
82602 2 Crushing Hazard
093366 1 Operators Manual
102196 1 Lube-CV Joint
111209A 2 Pinch Point
111209B 3 Stay clear of expeller when rotating or if tractor is running
111209C 4 Keep Out - Disengage all power and shut off tractor engine
111510 1 Discharge gate opening decal
112-11176 2 Shear Bolts - Remove broken shear bolt before replacing
093020 8 Grease zerk decal
71188B 1 Jack Storage Position
022310 2 Attention - Wheel Torque
LW112901 1 Auger Height Indicator Decal
B6 4 H&S Decal
2 H&S/Top Shot/Model # Decal-Side
2 H&S/Top Shot/Model # Decal-Rear & Front
2 Top Shot Name Decal
2 Model # Decal
404 1 Patent Decal
1 Spiral Decal for Main Auger Shaft-Rear
1 Degree of Angle Decal-PTO Shaft
6 Amber Reflector
3 Red Reflector
1 SMV Decal
ZX21 Red paint - Gallon
ZX22 Red paint - Quart
ZX23 Red paint - Pint
ZX79 Red paint - Spray Can