H&S 5134 Operator'S Manual And Parts List Download Page 33 | Manualshive

Page: 33 / 72

H&S 5134 Operator'S Manual And Parts List Download Page 33

NOTE:

The optional features & accessories listed in this chapter, are shipped with separate

instruction for installation, as applicable.

AUGER SPEED OPTIONS

Several different drive sprockets are available to change auger speeds to various spreading needs.
Sprockets are available as service parts.

EXPELLER SPEED OPTIONS

Several different drive sprockets are available to change expeller speeds to various spreading needs.
Sprockets are available as service parts.

SAFETY CHAINS

An appropriate-sized safety chain, to accommodate the potential weight of the loaded

Top Shot

, is

available.

OPTIONAL FEATURES & ACCESSORIES

ELECTRONIC SCALES & COMPONENTS

Model: Digi-Star GT400

An optional factory installed Digi-Star GT400 scale is available for accurate
weight measurement for each load spread. The 5-point weighbar system
features 3 modes, Net,Tare and Gross.

-31-

Model: Digi-Star NT460

An optional factory installed Digi-Star NT460 scale system is
available for accurate weight measurement and displaying
actual tons per acre. The Indicator has GPS capability and
stores pounds of manure spread on individual fields.

«
...
31
32
33
34
35
...
»

Summary of Contents for 5134









































































Reviews:

No comments