H&S 2112, Operator'S Manual

Page: 19 / 30

-17-
SHEAR BOLT
The beater and apron drive are protected by one shear bolt. Two
extra shear bolts are provided. Shearing of the bolt is normally
due to foreign objects in the manure, or starting the spreader
PTO too quickly with high tractor RPM’s. Always use H&S shear
bolts.
Shear
Bolt
Shields Removed For Clarity
WHEEL HUBS
To service or adjust the wheel hubs, tighten the
castellated nut on the spindle to the point where
there is no end-play and a slight drag on the
bearings. Replace the cotter key with a new one
of the correct size.
BEATER
The beater paddles are welded to the beater tube. Replacement of these paddles should be performed
by authorized service personnel who are competent welders. When replacing paddles, the sharp edge of
the teeth must lead in the direction of beater travel.
SERVICE