H&S 1126, Operator'S Manual

Page: 7 / 30

-5-
Model Number ______________________________________________
Serial Number ______________________________________________
Dealer’s Name _________________________________________________________________
Inspection Date _____________________________________________
Signature of Pre-Delivery Inspector _________________________________________________

Big Dog was not damaged in shipment. Check for dents and loose or missing parts.
Report damage immediately to H&S Manufacturing Co., Inc.

Big Dog has been correctly assembled according to instructions in this manual.
Wheel nuts and all other fasteners are tightly secured.

All bolts and fasteners are tight.

All shields and guards are in place and fastened.

All grease fittings have been lubricated. Both final drive assemblies are at proper gear lube
level in site glass. (See Lubrication Chapter in this manual).

Hoses and fittings are properly attached and there are no visible leaks.

All mechanisms are operating trouble-free.

Final drive chains are at proper tension.

Apron chains are adjusted properly.

Decals are in place and legible.
AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
DEALER PRE-DELIVERY CHECKLIST
After the
Big Dog
has been completely set up, check to be certain it is in correct operating order
before delivering to the customer. The following is a list of points to inspect. Check off each item as
you have made the proper adjustments and found the item operating satisfactorily.
(Remove Dealers File Copy
At Perforation)