H&S 1126, Operator'S Manual

Page: 14 / 30

-12-
W A R N I N G
TO PREVENT SERIOUS INJURY OR DEATH
Study The Above Safety Rules
ATTENTION - BE ALERT - YOUR SAFETY IS INVOLVED
BEFORE YOU ATTEMPT TO OPERATE THIS EQUIPMENT, READ AND STUDY THE FOLLOWING
INFORMATION. IN ADDITION, MAKE SURE THAT EVERY INDIVIDUAL WHO OPERATES OR WORKS
WITH THIS EQUIPMENT, WHETHER FAMILY MEMBER OR EMPLOYEE, IS FAMILIAR WITH THESE
SAFETY PRECAUTIONS. KNOW HOW TO STOP UNLOADING MECHANISM BEFORE STARTING IT.
If the machine becomes clogged, disengage truck hydraulics, stop the truck engine, remove ignition
key
and allow all mechanisms to stop before cleaning or working on the machine.
DO NOT ALLOW PERSONNEL OTHER THAN QUALIFIED OPERATOR NEAR THE MACHINE.
DO NOT
attempt to perform maintenance or repair with truck or tractor running and hydraulics hooked
to the power source.
DO NOT step up on machine at any time.
DO NOT leave truck or tractor cab when box is in operation.
DO NOT allow minors to operate or be near machine.
STAY CLEAR of rear of the Big Dog at all times.
DO NOT
clean, adjust, or lubricate the machine when any part is in operation.
BE SURE the machine is clear of people, tools, and any other objects before engaging hydraulics.
NEVER start Big Dog until all guards and safety shields are secured in place.
STAY CLEAR of hydraulic lines, they may be under extreme pressure or heat.
CAUTION - Beware of low electrical wires.
Loose or floppy clothing should not be worn by the operator.
H&S Mfg. Co. always takes the operator and their safety into consideration and guards exposed moving
parts for their protection. However, some areas cannot be guarded or shielded in order to assure proper
operation. In addition, the Operator’s Manual and decals on the machine itself warn you of further danger
and should be read and observed closely.
SAFETY INFORMATION