09
08
Check points before use│How to use
How to use│Cleaning method
① Make sure that the supplied components are not missing.
② Connect the adapter and check that the red LED lights up on the operation switch.
※ Please contact the place of purchase or the manufacturer if any component is missing or
there is something wrong with the product.
Check points before use
① Connect the adapter to the product.
② Open the lid, fill the water to the top marking line, and then close the lid.
③ Touch the operation switch. The blue LED on the operation switch and the three-color LED on the
bottom light up and the hydrogen bubble is automatically shut down after 12 minutes of operation (up
to 40 minutes when the cleaning mode is active).
④ After hydrogen bubbles and LED on the floor stops, you can drink high concentration of hydrogen
water.
⑤ It is automatically operated for 2 minutes every 10 minutes for constant dissolved water quantity, so
you can always drink high concentration of hydrogen water (green LED blinks at the bottom).
① When connecting the adapter, the central red
LED will light up and the central red LED will
turn off when charging is completed. (Charge
time 3 hours or more)
② The built-in battery is charged while the
adapter is connected. (Can be used while
charging.)
① Open the lid, fill the water
to the top marking line, and
then close the lid.
② Touch the operation switch.
The blue LED on the operation
switch and the three-color
LED on the bottom light up,
and hydrogen bubbles are
automatically turned off after
12 minutes.
③ After generating hydrogen
bubbles and LED on the
floor stop, you can drink
high c onc entration of
hydrogen water.
How to use
Cleaning method
Portable use (with built-in battery)
When charging the product
① Clean the outside of the water bottle with
a soft towel, and wash the inside of the
water container with water or diluted neutral
detergent in a soft sponge or cloth. After
washing, please be sure to wash away any
remaining neutral detergent.
② Do not use the neutral detergent solution and
wringer directly on the electrodes inside the
water bottle
③ Rinse with hot water (60 ~ 90 ℃) once a
week to disinfect the product.
④ Separate the lid separately and rinse with
flowing water.
For constant use (with adapter)
1
4
1
2
3
1
2
3
60
~90
℃
2
① Open the electrode active
powder provided at the
time of purchase and put
it in the cup provided. Fill
it with 2/3 of water and
dissolve.
② Pour the electrode active
solution prepared in ① into
the bucket of the main body
and operate it once (12
minutes).
③ When the operation is
completed, discard the
electrode active solution
and rinse the water bottle 2
or 3 times before use.
※ Do not eat electrode active powder or electrode active solution.
On first use after purchase
1
2
3
⅔
2
1
3
4
5
LED
STOP
Auto
1000ppb