- 17 -
NOTE
Insufficient air circulation affects both machine working and its performance.
3.3 Installation of Water-cooled Machine
The inlet and outlet pipes of cooling water must be properly installed before
operating the machine.
The requirements for the cooling water are:
Pure and no debris;
It's better to use soften water to prevent that furring appears inside of
the pipe to block the pipe and reduce the heat-exchange-efficiency.
Water temperature does not exceed 30 degrees Celsius;
Pressure range: 1 ~ 8 bar.
Connect the cleaning water pipe to a drinkable water source if the machine is
equipped with a cleaning tap.
NOTE
H&M recommends to use steel pipe which can bear pressure up to 8 bar.
NOTE
Keep the pipes fluent, don't bent.
Cooling water outlet
Cooling water inlet
TM
