Marinator MCR011
Troubleshooting
Problem
Possible Cause
Possible Solution
Marinator does not heat
1. No power at receptacle
2. Power switch not ON
3. Marinator not fully plugged into receptacle
1.
Check receptacle power
2.
Turn power on
3.
Plug the Marinator cord into 120V 15A
receptacle
Control display on (no heat)
1. Control not set high enough
1. Set the control temperature higher
Power switch ON and
control display on (no heat)
1. Defective heater
2. Defective control
1. Call H&K Customer Service at 1800-788-
2445
Control cycle on and off
1. No water in Marinator
2. High limit switch turning unit on and off
1. Carefully add water to fill line
Pan floating in water
1. Too much water in the Marinator
1. Carefully scoop water out with a coffee cup
until water level comes down to water fill line
stamped in each end of the Marinator
Revision (B)
