Preface
6
Version 2015v1
A
Battery charging connection
To charge the batteries, see 'Charging'.
B
Program
This program depends on the version of the wheelchair (front-wheel
drive or rear-wheel drive). The sticker indicates the program.
C
Danger of crushing!
Use caution when swinging the controller aside to avoid getting anything
crushed.
6
D
Speed sticker
The maximum speed is programmed. This depends on the version of the
wheelchair (front-wheel drive or rear-wheel drive).
E
Reference to the user manual
The wheelchair should only be used after the user manual has been
studied carefully.
Never use the wheelchair before having read and understood the
contents of the manual.
F
Neutral
1. Lever in the lowest position:
The drive of the relevant motor is disconnected: the wheelchair can be
pushed.
If your wheelchair is equipped with two freewheel handles, both must
be operated.
2. Lever in the highest position:
The drive of the relevant motor has been switched on: The wheelchair
can be electrically driven.
G
Tilt warning
To prevent the wheelchair from tilting forward, never stand on the foot
rest.
AFKNELGEVAAR!
ABKLEMGEFAHR!
TRAP DANGER!
H
Danger of getting fingers jammed
Keep hands and fingers away from moving parts when adjusting the
height and/or tilting angle of the wheelchair.
Summary of Contents for Y-E-S Series PUMA
