background image

For 25 years we have applied ourselves wholeheartedly to developing smart and easy-to-use assistive devices for easy 
transfers and to making life and work easier for both patients and personnel in the care sector.

Experience, innovation and training are the basis for SystemRoMedic, a total solution for every imaginable transfer 
situation.

Transfer:

 products for moving patients between locations.

Positioning:

 products for repositioning in the same location.

Support: 

products that provide mobility support.

Lifting:

 products adapted for lifting.

The philosophy behind SystemRoMedic is to prevent occupational injuries while improving the patient’s sense of inde-
pendence and dignity. Through a combination of training and a complete range of transfer-assistive devices, 
SystemRoMedic offers the means to improving both the work environment and the quality of care while enabling 
significant cost savings.

Our mission, to help people, has always been, and will continue to be, the driving force of innovation. We love easy 
transfers.

Contact your local distributor if you have any questions about the product and its use. See www.handicare.com for a 
complete list of distributors. Always make sure that you have the right version of the manual. The most recent editions of 
manuals are available for downloading from our website, www.handicare.com

Handicare AB
Veddestav. 15, Box 640           
SE-175 27 Järfälla
SWEDEN

Tel: +46 (0)8-557 62 200       
Fax:+46 (0)8-557 62 299            
E-mail: [email protected]

Internet: www.handicare.com

System

RoMedic

TM

Summary of Contents for SystemRoMedic RiseAtlas450M...

























Reviews: