English
ReTurn7500 and ReTurn7400 are used indoors for shorter transfers between wheelchair and bed, wheelchair and toilet/
portable toilet/wheelchair or chair/armchair. ReTurn7500 and ReTurn7400 can also be used to aid repositioning farther
back in the chair. Both models are designed for easy manoeuvring and use in confined spaces. They are easy to assemble
and disassemble in just two sections for easier transport and storage. ReTurn7500 is available in two versions. One model
has an opening at the upper vertical handle for hooking of ReTurnBelt. ReTurn7400 is lower than ReTurn7500 and is
designed mainly for children and short adults.
Visual inspection
Check the condition and function of the assistive
device regularly. Always inspect the product after
laundering. Check to ensure that seams and material
are free from damage. Check to ensure that fabric
is not worn or faded. If there are signs of wear, the
product must be discarded.
Always read the user manuals for all assistive devices used
during a transfer. Keep the user manual where it is accessible
to users of the product. Always make sure that you have the
right version of the user manual. The most recent editions of
user manuals are available for downloading from our website,
www.handicare.com.
Check Safety
Always read the user manual
A. Push the rising ladder/
tube down into the mount-
ing fixtures on the chassis,
so that the height-adjust-
ment buttons are facing
towards the caregiver.
B. Insert the fixture knobs
and tighten. Check to
ensure that the fixture
knobs are securely tight-
ened before using the
ReTurn.
Assembly
• ReTurn is intended for shorter transfers.
• Return can only be used on flat floor.
• The caregiver must always apply counter pressure in a safe
way when the user is standing up, sitting down and during the
actual transfer.
Note!
Always perform a risk assessment before using ReTurn.
Special requirements and conditions
Transport
The chassis and raising
ladder can be carried
separately. Carry the
chassis by holding the
tube on the front end of
the product.
Transport, e.g., by car,
and storage are easy,
since the ReTurn can
be disassembled in two
pieces.
To transfer with ReTurn, the user must be able to:
• support weight while standing
• stand up and maintain balance (with support)
• grasp handles
• understand instructions
NOTE! Increased tipping risk.
If ReTurn7400 is used for users of normal height, it is essential
that the user can support his/her weight while standing and can
maintain balance for a prolonged period.
A
B
3
M A N U A L
System
RoMedic
TM
System
RoMedic
TM
ReTurn7500/ReTurn7400
