Handicare PUMA 40, User Manual

Page: 30 / 40

30 | Maintenance of the wheelchair
6.3 Tyres
To ensure that your wheelchair functions
properly, it essential that the tyres are kept at
the correct pressure. The correct pressure is
indicated on the side of the tyre.
Tyre pressure
Puma 40
Castor wheel 9” 3.5 bar max.
Castor wheel 10” 3.5 bar max.
Drive wheel 13” 2.8 bar max.
Drive wheel 14” 2.1 bar max.
Tyres that are too soft will have a negative
effect on the wheelchair’s performance. Moving
the wheelchair will require more energy, making
more demands on the batteries. Furthermore,
wear on the tyres when driving with soft tyres is
unnecessarily high.
Note!
Never exceed the maximum tyre pressure
Drive wheel tyre repair
Note!
Tyres should only be replaced by a qualified
specialist. For an extensive description of tyre
repairs, please refer to the service manual
available to qualified specialists.
Before tyres are repaired they must first be fully
deflated.
6.4 Cleaning the wheelchair
Please consult the user manual for the seating
system for information about cleaning the
seating system (
&
Seating system).
Caution!
Ensure that the controller is switched off while
cleaning. If the joystick is accidently touched,
the wheelchair can start to move or the
electrical options can be operated accidentally.
Take care with water in view of the electronic
system
Removing dry dirt
First, wipe the dirty parts clean using a wet
sponge. Preferably use clean water or a mild
soap solution. Wipe the parts dry using a soft
dry cloth.
Note!
Never use abrasive or aggressive cleaning
agents. These can scratch the wheelchair.
Do not use organic solvents such as thinner,
benzine or white spirit.