Handicare PUMA 40, User Manual

Page: 28 / 40

28 | Maintenance of the wheelchair
Reconnect new batteries exactly as shown
in the battery wiring diagram located on the
inner surface of the battery access cover. The
battery wiring diagram is also located in the
owner’s manual for the controller.
Connect the battery cables to the first battery
(Figure 23, #1), place it onto the battery tray,
and slide it into the battery box. (Figure 23, #2)
Then connect the battery cables on the second
battery (Figure 23, #3), place it onto the tray,
and slide it into the battery box. (Figure 23, #4)
Warning!
Ensure that the fasteners are properly tightened
so that the connections are secure.
Ensure that the battery strap runs over the top
of both batteries. The following diagram shows
the correct battery positioning on the tray and
correct positioning of battery spacers.
(Figure 24)
Figure 23
Figure 24
Note! Insert the battery spacer set correctly, as shown above in Figure 24.