Adjustments options
Version 2015v1
15
2.2.4
Adjusting the seat angle
•
See fig. 010502040.
The seat angle of the seating system can be adjusted
continuously using the tilting mechanism.
See ‘Tilting the seating system’.
The minimum seat angle of this tilting mechanism can be
adjusted for each user individually. Using this adjustment, the
assistant can set the seating system in the pre-set angle and
use it as the basic position.
Before adjusting the minimum seat angle you must leave the
chair.
The minimum seat angle must be adjusted as follows:
•
Loosen both nuts (A) with a spanner with a key width of
13 mm.
•
Adjust the new angle by turning the bolts (B) in or out
some more.
Turning them out will increase the seat angle.
Turning them in will decrease the seat angle.
•
Tighten the nuts in the position finger-tight.
•
Try the new position.
•
Lock the new seat angle by tightening both nuts securely.
SADKIB-010502040-nl.doc
2.3
Adjusting the back-support angle
•
See fig. 010503010.
For optimal seating comfort the angle (B) of the backrest can
be adjusted continuously.
The angle of the backrest can be adjusted as follows:
•
Loosen the two Allen bolts (A) on the left side of the back,
under the seat, two turns with an Allen key with a key width
of 5 mm.
•
Adjust the desired back angle (B).
•
Tighten the Allen bolts again.
SADKIB-010503010.nl.doc
A
A
B
B
A
