Adjustments options
14
Version 2015v1
2.2.2
Position of seat cushion
•
See fig. 010502050.
The seat cushion can be fastened to the frame in three
positions. This allows the seat depth to be reduced.
The location of the seat cushion can be changed as follows:
•
Remove the seat from the chair by pulling it up.
•
Loosen the two clamps (B) with a Phillips screwdriver PH2.
•
Place the clamps at one of the other places (A).
•
Place the seat on the chair by clicking the clamps on the
front round tube of the seat frame.
Check whether the seat is clicked in place
securely.
XXXXXX-010502050.en.doc
2.2.3
Adjusting the seat width
•
See fig. 010502030.
The space between the two armrests can be adjusted as
desired between 36 cm and 52 cm (15" and 20"). The holder
for the armrests can be shifted in width on both sides.
Do the adjustment, or have it done by someone, and then
take your seat in the chair.
The seat width adjustment should be done as follows:
•
Loosen the two Allen bolts (A) on both sides of the chair
frame with an Allen key with a key width of 4 mm.
•
Slide the armrests to the desired width.
Set the side panels equally, in such a way that
you feel comfortable and that you have enough
support and enough freedom of movement.
•
Tighten the Allen bolts properly on both sides.
XXXXXX-010502030.en.doc
B
A
A
