HandiQuilter.com
Page 27
Press the “Main” button to return to the “Regulated” or
“Manual” menu screen or the “Back” button to return to
the “More” menu screen.
Calibrate Tension
The Tension button enables you to calibrate the tension
device. You should only calibrate the tension device under
the direction of Handi Quilter technical support.
While calibrating the tension, you will be asked to do the
following:
1. Remove the tension knob.
2. Gently press the spring against the tension discs while
not compressing the spring.
3. While holding the spring in place, press Reset.
4. When calibration is complete, replace the tension
knob.
Figure 52
