HandHeld Transaction Team TT8500, Startup Manual

Page: 17 / 68

Transaction Team™ TT8500 I-7
USB Host Installation
1. Make sure the power switch is turned off on the computer where you will be
installing the TT8500.
2. Plug the 15-pin connector (HDB15) of the serial cable into the underside of
the TT8500.
3. Plug the 9-pin
1
connector (DB9) of the serial cable into an available serial
port on your POS terminal/computer (usually COM port 1).
4. Plug the USB connector into the USB port on the TT8500.
5. Plug the other end of the USB cable into your USB device.
6. Plug the female connector of the AC power supply cable into the socket on
the back of the 9-pin serial cable connector (DB9), which is plugged into the
back of your POS terminal/computer.
7. Plug the AC power supply into a power outlet.
1. If your computer has a 25-pin serial port, you will need to obtain a 25-pin to 9-pin adapter
from your local computer store or other source.
6. Plug AC power
adapter into DB9
2. Plug HDB15
connector
into TT8500
4. Plug USB
connector
into TT8500
5. Plug USB
connector
into USB
device
3. Plug DB9
connector
into host