12
Suspend disk mode
Resume from suspend mode
In the suspend to disk mode, the current data is saved to the disk and the Algiz 8 is powered off.
When the Algiz 8 is in suspend to disk mode the battery consumption is the same as in the off
state.
To resume from the suspend modes, press the Power button described in the chapter
”Function buttons” on page 5.
ALGIZ 8 Manual - Using the Algiz 8
Note!
Since the suspend to disk mode stores information on the disk, make sure
there is sufficient disk space available.
Standby mode
Turn off monitor
The use of standby mode can increase operation time up to 8 hours. In standby mode power to
unnecessary functions is turned off. It takes approximately 10 seconds for the Algiz 8 to resume
operation when in standby mode.
By use of the turn off monitor function, operation time can increase up to 3.5 hours.
Algiz 8 resumes operation instantly, from standby mode, when the Power button is pressed.
Note!
Use of touch screen will not resume operation.
