CPS-Q5 User Manual
27
Note
:
1.
All telephone numbers, including the SOS numbers MUST be first registered in the
PHONEBOOK.
2.
When an alarm is triggered, the buttons on the handset will flash, indication on the
handset TFT display will appear with the terminal number followed by SOS “T1 SOS”,
all buttons on the handset will lock.
3.
To cancel the alarm on the communicator, press the On/Off button on the side of the
communicator used to trigger the SOS.
4.
To cancel the SOS alarm on the handset, press and hold the SOS button on the back
of the handset for about 7 seconds until the SOS alarm is canceled. You may also
place the handset on the base; this will also canceled the SOS alarm.
Please note: when an SOS alarm is triggered from the communicator, the handset buttons
will flash and it will indicate on the handset LCD which terminal triggered the SOS alarm “T2
SOS” for example (TERMINAL 2 SOS)
Communicator Battery Information
The communicator can be used for up to 4 hours talk time and 4.5 days standby. It is
recommended to charge the communicator battery the first time for a minimum of 12
hours; thereafter a complete charge takes around 90 minutes. When the communicator
has been placed on the charger or removed, a set of tones will be heard.
When the communicator is fully charged the SOS on the communicator will be displayed as
a solid light (will not flash).
Low Battery VOICE Announcement
The communicator is equipped with a voice prompt that will automatically announce that
the communicator battery is low and needs to be placed on the charger. Please charge the
communicator when you hear the voice prompt, you will have 30 minutes to place the
communicator on the charger before the call center is notified. However
it is best if you
charge the communicator daily
.
