CPS-Q5 User Manual
25
General Information
1.
The communicator range is up to 1300 feet from its base.
2.
The LED on top of the base will turn RED in charging mode.
3.
When the communicator’s battery is low and placed on the charger, the red lights on
communicator will flash. When the battery is fully charged the red lights on the
communicator will stay on.
4.
When wearing the communicator there will be no red lights on until the SOS button
is pressed, the red lights will then be on indicating that the SOS Alarm has be
activated. If the SOS alarm has been activated in error, press the On/Off button on
the side of the communicator, this will stop the SOS alarm from being sent.
5.
The communicator is automatically registered to the base station. In case the
communicator is not registered or you want to register additional communicators to
the same base, please follow the instructions below:
•
Communicator Registration: press the Page
button on the base (7
seconds) until the red light on the base starts flashing. Press and release the
SOS button on the communicator. Registration will be confirmed when a 3 tone
sound is heard from the communicator speaker. To verify if the communicator
is registered to the base, on the handset press and hold the
button for 3
seconds and select the last communicator registered (1 through 5), then press
the
button, the communicator you registered will start ringing. To end
the ringing, press the Off
button on the handset.
6.
When a communicator is misplaced: On the handset base press and release the Page
button on the base. The communicator registered to the base will automatically
ring.
•
To cancel, press the Page
button again on the base.
•
To answer on the communicator, press the SOS button.
