![background image](http://html1.mh-extra.com/html/hand-held-products/imageteam-4200/imageteam-4200_quick-start-manual_589755007.webp)
IMAGETEAM™ 4200 Quick Start Guide
3
Connecting the Imager for USB
A imager can be connected to the USB port of a computer.
1. Connect the appropriate interface cable to the imager.
2. Connect the other end of the cable to the computer.
Note: The cable must be connected at the imager end (1) before the PC (2) end
is connected.
3. The imager beeps.
4. Scan the appropriate bar code below for the desired USB configuration.
USB Interface Selection
Note: USB Keyboard and USB HID drivers are included with Microsoft®
Windows® 98 SE or later. The USB COM Port Emulation driver can be
downloaded from the Hand Held Products website (
www.handheld.com
).
1
2
USB HID Bar Code Imager
USB Keyboard (PC)
(Default)
USB COM Port Emulation
Summary of Contents for IMAGETEAM 4200
Page 1: ... IMAGETEAM 4200 Hand Held Linear Imager Quick Start Guide ...
Page 4: ...ii ...
Page 18: ...14 IMAGETEAM 4200 Quick Start Guide ...
Page 19: ......