Hand Held Products DOLPHIN 7600, User Manual, Page: 59 / 108

Dolphin® 7600 Series User’s Guide Rev B 7 - 3
Icon Color Indicators
The color of the icon in the command bar and on the main window indicates the connection and authentication status of the radio.
Main Window
Double-tap the icon in the command bar to open the Client . The main window opens displaying the installed radio. (The
radio is listed as a port.)
Port Status Icon
As the network interface starts or stops, the color of the port icon and the status field updates to reflect the current state of the
interface. The colors of the port status icon are the same as the color of the icon in the command bar. For details about what
each color means,
see Icon Color Indicators on page 7-3.
Command
Bar Icon Port
Icon Color Status
Yellow Authentication is in process.
Green Authentication succeeded.
Red Authentication failed.
If the icon is not yellow, red or green, then either the ports are not being controlled by 802.1X, or there is no authentication
activity on the controlled ports. The absence of yellow, red or green may also indicate that the network access server is not
an 802.1X aware device.
Blue There is no radio activity. The port may not be connected to an 802.1X-aware entity.
Note: If you are setting up the 802.11b/g radio to run without authentication and
without encryption, this icon does not change from the standard blue; see
Associating With Open APs on page 7-16.
Gray The port is not in use or is disabled. Either the Client isn’t running, or the port is not
bound to the 802.1X protocol.
Orange The port is associated, but there is no response to 802.11b/g packets.
If using WEP without 802.1x authentication, this will be the final state when the
connection is complete. If using 802.1x authentication, it is either a transient
condition or can indicate that attempts to authenticate have timed out as there was
no response to 802.1X packets.
Port
Status
icon