![background image](http://html1.mh-extra.com/html/hand-held-products/algiz-10/algiz-10_manual-manual_589773025.webp)
25
ALGIZ 10 Manual - Chapter 2 - Getting Started
1. Hold the memory card by its edges with the edge-connector side towards the slot.
2. Hold the card at a shallow angle (about 25 degrees) and insert the edge connector
into the connector slot (4). The “gold teeth” of the edge connector should no longer
be visible when the card is fully inserted.
3. Press the card downwards so that is flat inside the compartment (4). You may hear
an audible click as the latches of the connector lock the card in place.
Inserting a Memory Card
4. Replace bluetooth module, attach harness and secure it with screws.
5. Replace the RAM compartment cover and secure it with the two screws.
Your Tablet PC will automatically detect the change in RAM capacity when it restarts.
Summary of Contents for ALGIZ 10
